The Message Board
|
|
|
| Burke's Backyard Message Board > Renovation and DIY |
| Author | Posts | |
|
crikey Posts: 9 |
powder coated fencing Posted 893 days ago We have a black, powder coated gate and baulestrade. There are a few spots where the coating has lifted. Any of you good people got suggestions how we can "touch up" this rather than pulling all apart to take to be re-coated please? We actually want to extend the fencing on the canal balestraude but have been quoted ridiculous $'s. The balestraude is powder coated uprights with marine wire levels (mmmm not tech speak). Many thanks, in advance, for any advice. (I live on the Gold Coast - in case you are near.) |
0 0 Alert moderator
|
|
Georgen Posts: 96 |
RE: powder coated fencing Posted 887 days ago If gate is steel, I would suggest rust converter. One I got years ago at Franklins turned rust into black enamel looking surface. Don't remember if I had to paint it, but because like you I wanted it black, so I left it. |
0 0 Alert moderator
|
|
crikey Posts: 9 |
RE: powder coated fencing Posted 854 days ago Thanks Georgen. Much appreciated. Will give it a whirl. |
0 0 Alert moderator
|
|